Samsung ML-2855ND Laser Printer "fuser saying hot" Questions

...Fuser Low Heat Error." Obviously the printer hasn't been over used because it would say too hot, what is the problem? Basically the error message is telling you the printer cannot keep the fuser ...

...saying WARMING UP PLEASE WAIT. Diana I think the fuser is bad. They're not too hard to put in yourself. PN JC81-00394A. Truthfully a bad fuser could be cold or hot, because the temperature sensor may ...

...off printer, check and reseat fuser. no luck. any suggestions? fuser was not hot... Replace fuser assembly is the fix Normal consumable, the lamp electrics (lamp, thermistor) will have blown. Part ...

Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."

...come out half way it say jam in out put bin This could be a fuser issue or a paper exit sensor issue. Please take out the fuser and check the pressure roller. Be careful, the fuser is extremely

...are clean and insert it back into the printer. The fuser unit will be very hot if it is working. If the printer still gives this error message then the fuser unit may be faulty and needs

and the error code continues to show, saying fuser is hot, however I left the printer off all night. Did you repace the fuser?? When no, replace it. When yes, you probibly have a defective powersupply

Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."

Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."

...fuser (the hot part that fixes the toner to the paper). Check if there is any sheet jammed inside your printer or if any sensor is in the wrong position. If everything seems to be ok, you may need to ...