Venturer PVD730 Portable DVD Player "blu 5 touch problems" Questions

...5 minutes will not reset, still flashes wait, there is no disc in the tray holding down the on/off switch for 10 seconds shuts if off momentarily but returns to wait shortly after that never ...

...5 to 10 min saying protect shutdown i have checked all the wires none are touching cant figure out what the problem is or you are using more speakers than the system can load, or one or more of the ...

...5 second to reset to factory settings with no luck. I tried unpowering and repowering several times too. Although my BD-P1500 can eject the discs, it stopped reading the discs a couple of months ago. ...

...5 cms from the player on each side).clean the lens using only the recommended solvents.never use detergents or plain water and importantly dont touch the lens with bare hands. every problem has a ...

...touch the power board. 2. Dont hold these air cans upside down or sideways because if you do then you will squirt sub zero degrees liquid 'whatever' onto the lens (very bad). After unplugging, just ...

...touch the power board. 2. Dont hold these air cans upside down or sideways because if you do then you will squirt sub zero degrees liquid 'whatever' onto the lens (very bad). After unplugging, just ...

...5 minutes then go completely dead, only switching off at the mains would restore power, I seem to have solved this by increasing the size of the heat sink on the power board, i just drilled a hole on ...

...5 times during the movie play and is irritating. Also if i touch the top of the DVD compartment cover or touch the player or tilt the player, the playing stops and the loading of DVD starts. I did a ...

...5 mins and powers off automatically. IT doesn't power on. I will have to leave it alone and play the next day and the same problem again. What should I do. Thanks Venkata it will automatically shut ...

...5 philips head screws) Don't touch any of the electronics. 3) Remove the blk plastic DVD reader cover CAREFULLY (6 philips head screws) Don't move any of the parts on the cover or it's really hard to ...