...filter. 1. Remove bottom basket. Remove top basket (Pop off 'keepers' at the ends of the slidding shelf supports). 2. Remove bottom washing arm. Unscrew (Gently but firmily) centre post. Lift arm ...
...cap (Needs some wiggling to free it up). Remove the cutter and filter. It is on a spring loaded pin. Pull in foreward and also lift the filter disc up and out. Thoroughly clean the filter. ...
...basket (Pop off 'keepers' at the ends of the slidding shelf supports). 2. Remove bottom washing arm. Unscrew (Gently but firmly) the centre post. Lift arm assembly out. 3. Remove overhear conduit. ...
filter but can't find it. Dumb question I'm sure but needs answering! kenmore model 665 Dishwasher doesn't drain fully and dishes are soapy. Think there is a clog? I have a Quiet Guard 4. Same problem
Question about Kenmore Dishwashers
...filter. It is on a spring loaded pin. Pull cutter blade foreword and lift filter disc straight up. Clean filter disc thoroughly Reassemble! you motor housing is clogged up with debris. you have to ...
...filter is pluged. It needs to be cleaned 1. Remove bottom basket. Remove top basket (Pop off 'keepers' at the ends of the slidding shelf supports. 2. Remove bottom washing arm. Unscrew (Gently but ...
...spring loaded pin. Pull the cutter foreword while lifting the filter disc straight up. Thoroughly clean the filter disc - a knife will be req'd to scrape in clean. Reassemble in reverse to the ...
...filter (this is the water blocking problem). It is on a spring loaded pin. Pull the cutter blade foreward and lift the filter disc straight up. Clean thoroughly. I ran a 'quick rinse' cycle with ...
...filter. - Remove the lid from the salt dispenser - and now the tricky part, you need to find something that will allow you to remove the large plastic 'nut' that holds the salt dispenser to the ...
213 questions posted
Usually answered in minutes!
485 Questions
214 Questions
206 Questions
175 Questions
145 Questions