Kenwood KDC-MP342U Car CD Player "protect flashing radio" Questions

Protect is flashing on the radio When the radio is turned on protect starts flashing. Wires all seem to be ok wires are ok but speakers may not be which can put it into protect.other then that your ...

...flashing protect, and i've disconnected the speakers and unplugged the radio for about 30 min, plugged radio back in still flashing protect Chances are pretty good either the output ic or the ...

a time and reset the radio but the protect still flashes check the speakers for shorts or grounds. if all checks out fine try disconnecting power to the deck for a few seconds and then reconnecting it

...PROTECT" started flashing and the radio will not work at all. What do I need to do? I appreciate your help if you can. Thank you, Shank22 In a Kenwood deck, "PROTECT" usually means that one of the ...

...flashing the word protect I was replacing the dash in my 1999 chevy silverado-the entire dash will not work now and the kenwood is flashing the word protect. Nothing is working. i installed this ...

...flashing "protect" and I've tried to reset it. Not working. How do I reset it? I'm sure it's 2 buttons to hold down or something. Help! If resetting the radio does not make "protect" go away, you ...

...flashing the word protect all i did was turn my car off then on and it did this, how o i fix it? reset button on front of radio. push in with a pin while car is on. In my case I just hit the reset ...

Protect flashing on my Kenwood kdc-mp4345u check your speakers and speaker wires for shorts. if there are none try disconnecting power to the radio for a few minutes. if protect still comes on you may

Flashing PROTECT I was listening to my radio and it quit working. Instead it now is flashing "PROTECT" I can hit standby and it goes off. If I hit standby again, PROTECT This is often caused by a ...