Kenwood KDC-X493 Car CD/ MP3 Player "ares doesn 39 connect" Questions

...Doesn't turn on. Checked the fuses - they're good. Tried the radio on a bench 12v power supply and my car battery - still doesn't turn on. Bought another radio at walmart and it ...

wiring Doesn't turn on hi chandler, if your yellow, red and black wires are "correctly" and securely connected then the rest of the problem lay inside the unit. also try resetting the unit. cheers

doesn't extend out all the way it gets stuck laying flat and the cable that's connected to the display came out. That unit still plays music put I cant change channel or volume. I need to open

...doesn't work, you may have bad solder connections on some surface mount resistors inside of the radio.  If you are good at soldering they should be on the right front of the radio, you will ...

...doesn't work Volume up button works, but not the down button. hi, make sure the face pins are clean; try resetting the unit; check to see if the feel of the down switch is the same as the up ...

...doesn't offer the solution, your Pioneer may require wiring of a relay as is necessary on several newer Pioneer navigation units.  Some Pioneer radios will still not allow video to be viewed ...

...doesn't it? It's all pretty simple once you know. Lastly, the fictional unit "Music Power" can be anything really, but is often either Peak or P-P values. It's just more smoke and mirrors ...

...   try to unplug from the 110 outlet then hold the on button down while plugging it back in this should re iniatalize the unit and if it still doesn't work you may have a hardware ...

...doesn't work, disconnect and start with a different one. If none of them work is is in the stereo. If any work, i would check the ones that didn't to see if they are bad or grounded out. ...

doesn't, re-connect speakers one by one and test power again. It will either cut out when you get to a speaker or wire that's shorted, or work just fine. it's protecting itself from damage