Samsung Speedplus SH-S223 22x DVD?±RW DL SATA Drive w/LightScribe & Software Burner "cd tray computers" Questions

...tray from my pc it also work , but no reading no writing , what to do please ? make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty ...

...CD tray:Open the Start Menu and go to My Computer (or Computer if you're on Vista or Windows 7). Right-click on your CD drive, and then click on Eject. The tray should eject. When you change the ...

...cd rom tray will not eject and the light is My cd/dvd rom tray will not eject on my computer and the light is yellow instead of green when I attempt to eject. I also tried to go in a manually eject ...

...CD TRAY KEEPS MOVING IN AND OUT WITHOUT MY PROMPTING.IT DOES NOT READ ANY CD I WISH TO VIEW.I HAVE TRIED SCANING FOR VIRUSES BUT IT DOES NOT HELP. THE TRAY MULFUNCTIONS RIGHT FROM SWITCHING ON THE ...

...cd-rom automatically ejects Open tray, insert disc, close tray. LED flashes, 2-4 seconds pass, tray opens. Impacts all discs - data & audio. Recently reinstalled Windows XP. All else is working fine. ...

...cd&dvd? By opening what do you mean? Is it Tray or File? If Tray is not opening, Turn your Computer off, then insert a needle or a pin in the hole just beneath Tray and push the needle in slowly, ...

...CD/DVD drive tray by - Straighten a paper clip and gently insert it into a tiny hole below the drive tray next to the Eject button. Push the paper clip gently until the drive tray pops out, then pull ...

...hole in the CD drawer (if it's a computer CD player).  That's the manual tray eject, and you can use that to open the tray. Before doing that though, I'd make sure there's power getting to

...CD/DVD rom.. just below the tray there is a Small Hole .. use a Needle or any other device that may go in that hole.. try to press on eject button there.. and try to press using needle.. try doing so ...

CD tray on my computer will not open Use a paper clip and insert about two inches of it into the small hole around the front tray of unit - that will manually open the tray for disk removal. If wiring