...clean inlet screens maytag washer It is simple. First, shut the water off to your machine. Then Unplug it. Next, go behind the machine and Gently with a Hand Wrench turn the water inlet tubes counter ...
the letters hf are flashing not alowing the machine to wash the clothes check water preassure. or clean the valve screens
...inlet line (cold) clean water inlet screens( there is also screens inside the valves) hook back up turn water on check for leaks test .If this helped you please vote/// need more help please
...washing clothes are tangled up. almost knotted sometimes. any suggestions For low water volume - or "Trickling" effect... 1. Turn off the water supply to both hoses. 2. Remove hoses (one at a time so ...
...pull and clean them be sure to reinstall screens before reconnecting..also fluch hoses out after reconnecting to faucet end and before reconnecting to washer to flush any trash/sand that be in ...
...machine and next to the pump you should see a drain plug -- unscrew the plug and drain water,, now clean out anything that might be in the hose or in the catch screen. re-install the plug and start ...
Question about Kenmore Elite Washing Machines
...washing machine My machine will start to fill and then quits and the error code F32 flashes. I have cleaned the screens on the water line intakes but that never made a difference. Can anyone help me? ...
Question about Kenmore Elite Washing Machines
...clean it. It will likely be full of sediment and calcium deposits from your pipes. 5. Replace the inlet screens. 6. Re-fit the hose to the machine. 7. Turn on water supply valves. 8. re-try. Thanks ...
...screens are clean reinstall them in the inlet water valve. Re-connect the washer fill hoses. Just for grins... check the wall connection of the water hoses to make sure there are not HOSE screens at ...
498 questions posted
Usually answered in minutes!
3,839 Questions
1,023 Questions
69 Questions
45 Questions
20 Questions