Electrolux EIFLW55I Washer "remove drawers side" Questions

...push the lever down, the other side pull the lever up. Remove the small screw on either side of the support slide at the front of the drawer. Lift the drawer and push support slide away from the ...

drawers, you need to remove one each 1/4" head sheet metal screw from the end closest tot he drawer front. this will allow you to slide the drawers out and clean the mess undere both the dryer and the

...side of the track removes. Simply remove these screws on both sides of the drawer with a small hex head socket and the drawer will pull right out. Push the tracks back into the pedestal until done ...

how to remove drawer on pedestal water is leaking from our Kenmore washer into the drawer of our pedestal. We want to remove it to see if we can determine where the leak is from without removing the ...

...remove the support rail from the drawer? (2 screws on each side) usually when you pull the drawer out. look the the side of the trake you will see a black pointy thing you need to push one up and one ...

...side of drawer unit need to be removed.)5. Remove the lid from the drawer unit. Thoroughly wash out the drawer unit. Also wash out the drawer. (I forgot whether the lid can be removed before removing ...

remove the drawer: Pull the drawer out as far as possible, there is a small depression on the left hand side at the top of the drawer, about the size of a fingertip press the depression to release the

...remove left side that has torx screw, middle that has snaps but on right side cant seem to find release. Removing the Washer Top Three screws secure the washer top at the back of the washer. Remove ...

...the spring on the back side - carefully remove the spring and using needle nose pliers squeeze the spring ends together - this will cause the spring to relax a bit - reinstall and test. Hope this ...

...side of the detergent assembly to remove the tray. I guess just popping the tabs creates enough clearance for the tray to slide out. Then I used the info. from the fix by Doug Rozman and filed down ...