Whirlpool Cabrio WTW6800W Washer "change start button" Questions

When I push the Start button it does not click or work? change same

change temp. I am VERY unhappy with my Cabrio. I haven't called for service yet since I yesterday was the first time I have had the problem. I would appreciate a post if anyone else has had this issue

...start to stop the water. Robert LD flashes when the water level does not change after the drain pump is on. Check the following: Is it oversudsed? Is the drain pump clogged? Is the drain hose kinked ...

...start up. We change load and level. Next time it does it again. Macxhine is three years old. It has started this in the last month. Keypad/User Interface Failure F then 2 flashes when in: Diagnostics ...

...start 4 or 5 times again.What part do I need to change???? Thanks Keypad/User Interface Failure A fault code of "F" then "1" flashes when there is a primary control failure. You will need to replace ...

...program. Note: The default program is the wash cycle that the washing machine will automatically start when it is turned on. You can change the default program at any time by following these

...change automatically, however when I press the start button or any other button there is no reaction at all. Do you have any suggestion for fixing this? Thank you in advance, Anna. check your door ...

Start /cancel button will not let me change programme. Brenda You need to hold the start button infor at least 3 seconds, then change programme to pump out. once that programme has finished change the

...change. Holding the start/pause button doesn't do anything. Trying to change the load size, spin speed, or temp doesn't do anything or change the lights on the panel. I've tried unplugging for 30 ...

change. The Pause button won't cancel and I can't start the machine. Are you sure the door is closed properly? Give it an extra push. The start/pause button could also be damaged/faulty. Try switching