Kenmore 23822 Top Load Washer "clicking noise going spin" Questions

...clicking noise when it tried to spin. I replaced the motor coupler and now it spins, But, it still makes that clicking noise during the spin cycle. It drains & agitates fine. It looks as if the ...

...noise be the timer advancing? timer makes clicking noieses also.then that would put into question your lid switch.but you said it starts again after a few minutes.if thats a sure thing then it ,your ...

...clicking noise during gentle cycle The gears maybe going out. Sometimes it is able to engage in the other direction which the spin, sometimes not. Washing machine have complex gears that in one way ...

...clicking, ratcheting type noise after it was done spinning. That noise seems to have gone away. But, Now my clothes are pretty wet when the washer is finished with the final spin and I hear a squeaky ...

...clicking noise and now doesn't work at all. At first it made the clicking noise only after the spin cycle was finishing. What wrong with it? It currently just clicks. it locks the lid and that's it. ...

...clicking noise. The driven wheel at the bottom of the basin is "skipping". That ramped cam at the bottom. The washer spin cycle worked until the motor pulley dug a divot in the v-belt. No evidence of ...

...spin and makes loud clicking noises it starts to drain and spin and then you hear what sounds like the clutch clicking and then the moter seems to heat up and shut off. when it gets stuck i can go to ...

...spin tab with a straw. Terrible noise continued all during process of draining the water. The following are the reasons for the drum not spinning :- * Test the lid switch * Test the timer control * ...

...clicking noise occurred (as if some type of metal ridges were sliding and not engaging) There does not seem to be any issue with spin speed (standard fast speed), but the noise is extremely loud. I ...

...clicking noise. washer will wash but just makes a clicking noise when its supposed to go into drain and spin.and if i put it in just spin and drain mode the same thing happens this is caused by a ...