thumping hitting front stops on wash cycle. my whre5550 is hitting the stops on front inside top when washing. it makes like a thump,then swish, thump, swish, thump,swish. its the tub swinging under ...
during deceleration after spin cycle there is a loud thump,thump every 180 degrees of tub rotation.Can i easily repair this and what are the estimated parts cost? I assume that you have checked how ...
Question about Whirlpool Washing Machines
...thumping after finished spin cycle My top loading Whirlpool washing machine makes a loud thumping sound at the end of the first spin cycle as it is winding down just before refilling for the rinse ...
it is makeing a nose when it spins If its a rattle could be a lose agitator if front load then screeching or thumping is most likely out of round tub or wheels top load thumps suspension springs loud ...
Question about Speed Washing Machines
...thumping does not increase with speed so don't think it is a balance issue. It is constant from the beginning. Thank you Sounds like one of the balancing springs either broke or came off. What Mr ...
Loud thumping while spinning Loud thumping while in spin cycle like drum is hitting something.....bam bam bam. I tried redistributing the load, removing some of the clothes and it still thumps, even ...
Thumping sound without spin In the spin cycle, the washer makes a thumping sound (not actually thumping, though) and does not get to full spin speed. It does spin, just not fast. What could the ...
Question about Maytag Washing Machines
washer fills with water, loud thump sound, no agitation occurs. Thump sound is followed by burning smell? The thump is probably the motor trying to start followed by the burning smell of the belt ...
Question about Washing Machines
Washer's external Drain hose dislodged at drain pipe, do you suspect the recent severe thumping spin cycle caused this to happen? Flooding occurred. How would you test drain hose? What could be the ...
Machine makes a thumping noise when spinning When sppin cycle starts the machine makes a thumping sound like it is out of balance or bad bearing.... If its thumping you have the maching overloaded and
463 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
