...HE2 plus wont turn on. Check that it is plugged in. Check that the breaker is on on the breaker box or that the fuse is still good. See if there is a seperate circuit control switch for the washer ...
no power when plugged in, power at wall but the controls will not go on Either a fuse is bad or power supply is bad which is common. you can check power supply power with voltmeter and look at fuse
...HE2 Won't Turn On Washer has been running but all control lights have been blinking on and off sporadically. I don't have a status control indicator on this model. Now machine started a ...
Question about Kenmore Washing Machines
Dryer will not heat when using any of the heating cycles. first check element, then is it isnt broken check safety fuse on element assembly for continuity theres an other termal fuse right of the fan ...
has power but nothing seems to work intercater lights come on but nothing seems to work some of these units have a fuse in the panel box?
where is the line fuse located in plug
no lights, no power, whatsoever when plugged in hello obviously you've checked the fuse in the plug if thats ok it could have blew the fuse inside the washer it will be on the power board glass type .
Washer won't power on Washer won't power on hello, have you checked the fuse inside the washer it will be located the washer's circuit board but beware if it blows again then you
washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside
...washing machine to the electrical outlet to make sure it is connected to the washing machine properly. If the cable is cut or damaged, you need to replace it before performing your next wash load.2 ...
463 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions