Kenmore 42822 Front Load Washer "top drum fall" Questions

...top of the drum they fall and the weight of the cloths themselves provides the agitating action. I have been using a front load washer for years, wouldent think of using a top load. Hope this helps.. ...

My washer will not spin and acts like the inner drum with holes is stuck, what is wrong? Ive tried turning the inner drum with holes in it, it will turn counter clockwise but will not turn clockwise. ...

...top of the drum and can loosen and fall to the bottom damaging the spider pulley. If the counter weight is firmly attached to the top of the washer drum and the belt is attached to the spider pulley ...

...top of the drum and can loosen and fall to the bottom damaging the spider pulley. If the counter weight is firmly attached to the top of the washer drum and the belt is attached to the spider pulley ...

...drum. But my granddaughter found a way! She opened the washing powder dispenser at the top of the machine and dropped three coins (that we know about) into the drawer and closed it. The water fill ...

...top when the drum slows down or stops in prep starting spin cycle. As the man above stated, The damper may be bad. The dampeners take care of minor imbalance. If possible,  try to determine if ...

Leaving clothes wet. Machine does not completely spin out on final spin. The side spring of the drum was falling or rusted/ open at the back some screws / need to replace new if nothing /visit ...

drum falls to one side when not in use If this is a top load then you have worn springs that are attached to the tub from underneath they will need to be replaced

how to remove pins stuck in the washing machine if the pins are visible try using a wire cutters and if you have a magnet to stop them falling back into the drum

...fall out the drum goes off center and the motor can no longer drive it. This model has no rollers, the front of the drum has plastic glides mounted on the front of the drum that ride on teflon ...