...tell me how to test the water valve and motor controller using the meter, thank you jon problem with the pump. take the clothes out, empty water (manually, if necessary), and lift edge & look ...
...tell from here. However, If you do this test you can eliminate one of the above. Lift the lid of the washer, hold the rim of the inner-tub and spin it clockwise and then anti-clockwise. If it spins ...
...lift the control panel off. Next to where the water hoses are connected you'll see a ziploc bag with the tech sheet inside. It has instructions on how to put the machine into diagnostics ...
...lift in the machine somewhere that is not completely dumping out ! This is sometimes common on front loaders! Or the pump is weak! I tell my customers to try running the washer without clothes once a ...
...pump look in the hose that comes from the bottom of the tub to the drain hose and look for something there when you spin the drum by hand does it sound grindy? can you lift the basket up and down is ...
...tell by our serial number what year we made our purchase. Thanks for any help!!! The water is just sitting! help.... Jim This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, ...
Question about Kenmore Washing Machines
tell me? "F20" is a No Water Detect error. It is an indication that you either have no water coming into the washer, or very little water at all. If the pressure switch has not tripped after 6 minutes
...pump may be broken. Examine where water is coming from. If it fills up and does not stop it is in your pressure dome hose. Remove cabinet and examine. UNPLUG To remove cabinet. Remove 2 screws in ...
...lift and close the lid to your washer and listen to see if I here the lid switch clicking noise. If I do not here the clicking noise I would check the Lid switch. 2. I would move the timer to ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions