...spin tube with two notches in it. There is a block assembly that holds the inner basket down on to the spin tube. This can be accessed by removing the top of the agitator and take out the 7/16 screw. ...
remove the agitator .. and check the top nut there is two keys that stick up from the spin tube that lock the inner tube to the spin tube... if the two keys are broken off then replace the spin tube..
...spin tube has 2 tabs that lock into slots on top of block. these can strip out and cause the spin tube to spin inside block. watch it and turn machine on spin. tub can also drop and drag on bottom of ...
...water level switch remove clear tube from switch, with some water in tub, i suck water up and back down the tube, clearing the tube. After tube is clear spin machine for 3 mins. Test water fill
...spin tube. You will have to remove the trans to change out the spin tube. Take out the basket, there should be 2 ears from the spin tube that nest in the drive block. Attached is a photo to help you ...
...spin tube clitch pads are getting worn. You cna remove the back panel cover and watch this again with the timer in spin. Keep you hands out of the inside rear of the maching and look When the lid is ...
Question about Whirlpool Washing Machines
...spin tube-basket drive assembly under the inner basket. The spanner nut is under the agitator, locking the basket to the spin tube. The drive block has two slots that lock onto the two ears of the ...
...spinning). Is there anything else that can be done to fix this problem? you must have a faulty transmission or spin tube I could check the top of the spin tube..let me know if you want to go into
...was not spinning out the clothes. Now the spin cycle works but the babging is still there. What can it be? you need a new spin tube.. Their is no way to stop the sound without replacing the spin ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions