Question about Kenmore Washing Machines
solenoid for continuity. now here is the secret. This washer is getting age on it. The solenoids have shift pins mounted on shift levers to change the action from wash to spin. the motor on this model
...raise or lower the plungers, shifing the cam bars to either the agitate or spin position. One coil shifts the cam bar that engages and disengages the spin cycle, and the other coil shifts the ...
Question about Hotpoint Washing Machines
shift between normal and gentle. There is a clicking noise like a solenoid that can't kick in? Question edited for clarity. Question moved from Cars and Trucks Category. Call for service. You have and
...model? I can hear the motor spinning, but still does not spin or agitate. check the "wig-wags" that shift the transmission in the washer,they are 2 coils(solenoids) located adjacent the motor on the ...
Question about Whirlpool Washing Machines
...running called wig wag solenoids. Check for broken wires and movement of the outer slide bar that shifts to make spin. It may need lubrication. Go to www.appliancepartspros.com to get a
...solenoid that shifts the spin shift arm is not catching and the drum will not spin. The other possibility is the spin clutch is slipping and make a "grinding/ratcheting" sound. Neither, unfortunately ...
Question about Kenmore Washing Machines
...FILL UP AND THEN IT WILL STOP It sounds like the wig wam solenoids are not working,they are what shifts your washer from wash to spin, rinse,etc.They should be mounted under the drum in the center ...
shift gears. It does this by means of a solenoid mounted on the transmission called a wigwag. Note: if the lid switch is bad no power can go to the wigwag and shift it. If this is a direct drive model
does not spin all the other cycles work? Two things.. Either the solenoid that shifts the transmission has gone bad. Do you hear a secondary Buzzing of the solenoid right at the Spin cycle? OR the ...
...solenoid (perhaps wigwag and all) and slide the shift bar yourself. 4. If you can just get the machine into neutral, even if the motor isn't running you should be able to lower the drain hose into a ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions
