Kenmore 22422 Top Load Washer "replace drive belt stackable dryer" Questions

Ad

Question about Splendide Washing Machines

1 Answer

...drive belt failed. How do I remove and replace the belt. Does the front come off to give access to belt removal and replacement? Thanks for the help. [email protected] The belt appears to be ...

Ad

Question about Kenmore Washing Machines

1 Answer

...Drive I just need to replace a loose belt drive on a Kenmore washer/dryer stackable the washer part. How do I do it myself? Remove the rear cover on the unit and see if the belt is loose. It should ...

Ad

Question about Kenmore Washing Machines

1 Answer

replace the belt but it still smokes and wont spin. Is there and adjustment? Hi, There are no adjustments. Make sure the pulley on the idler and the drive pulley are tirning freely. It is possible the

Question about Kenmore Washing Machines

1 Answer

...drive belt pulley under the wash tub. If they go bad, your motor will still function normally, but the wash tub will not spin or agitate. Now, another possible problem could be a nail or screw stuck ...

Question about GE Washing Machines

1 Answer

drive motor faulty as lid lock worked fine. Replaced motor and worked however still no agitation or spin. Transmission engages however inner tub will not spin and belt just spins on the pulley leaving

Question about Kenmore Washing Machines

3 Answers

replace it. For this job, you probably want to hire a qualified appliance repair technician. The drive motor may be defective. Many washer brands use a reversing motor. For agitation the motor runs in

Question about Kenmore Washing Machines

2 Answers

...Drive Belt (check belt during parts removal for wear) - Wash Tub Support Shocks (The shocks can sometimes break when trying to remove) NOTE: 1. If you replace the front tub shell you will need to ...

Question about Equator Washing Machines

1 Answer

...drive coupleror one of its retainers. This washer doesn't have a belt. Instead, the motor is directly coupled to the gearcase by a drive coupler; that's why it's called a direct drive washer. Read ...

...replace it before the washing machine will start. Door Interlock The problem could be with the door interlock. If the lights come on but the machine won't start, this might well be the cause. This ...

...drive motor, fill valve, drain motor or door lock then the washer may not start. The main control board on most washers is complicated and difficult to diagnose without proper test equipment and ...

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

1,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...