Kenmore 22422 Top Load Washer "loading machine dirt accumulation" Questions

Ad

Question about Kenmore Washing Machines

2 Answers

dirt accumulated in parts of the pan or machine? Your regular powder should be able to remove any build up of dirt , put it on to a boil wash with no clothes in it run about 1/2 hour this should clean

Ad

...soap dispenser of my GE front load washing machine? Possible that this could be due to accumulation of dirt and so a good clean up of the washer might help/ Please check this link for tips: ...

Ad

Question about Kenmore Washing Machines

1 Answer

accumulation of un-dissolved detergent, dirt/grime and body oils stuck on the inside wall of the outer tub. When washing using Hot water, it is causing some of the accumulation to break loose in small

Question about Bosch Washing Machines

1 Answer

How can you remove the glass on the washer door...it has an accumulation of dirt in the air space. We would like to remove it to clean it. Loosen screws on hinge, be care door can be heavy.

Question about Frigidaire Washing Machines

1 Answer

my washer doesn't drain water TRY-it-OUT : Open the front panel ( can be located down-right to you ) and you can remove the accumulated dirt and scales in it and your problem will be solved

Question about GE Washing Machines

1 Answer

water is puddling during wash cyles? Check your rubber seal for any tears. Then wash the inside glass door especially near the bottom. This is where all the dirt and hair accumulates

Question about Kenmore Washing Machines

1 Answer

Dirt is accumulating between drum and rubber seal and leaves stains on the clothes. Clean the door boot with a 50/50 solution of bleach and water with a rag. This should be done regularly. It will ...

...into the machine. failure of the inlet valve. You can find this in the inlet pipe section, remove and check if dirt had accumulated to jam the valve. If not the valve is faulty and must be

Question about Maytag Washing Machines

1 Answer

I have a front load washer, and the water is leaking - seems like the rubber has worn out Check the rubber boot for any tears If you cannot find any tears then make sure to clean the glass door ...

Question about Kenmore Washing Machines

1 Answer

true then the spindle of the washer is tight with dirt accumulation , which makes the belt slip when in wash mode. so look below the washer, remove the spindle , clean and reset. replace belt and test

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

1,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...