80 series washer i need to replace agitator dogs inan 80 series kenmore washer...how? Hi, Remove the cap on the agitator and then remove the inside cover. There is a 7/16" bolt under the inside cover.
...80 model...is it the same with this model too? Usually changing the dog agits are the same on each model of the same brand. With the model number I can tell you exactly how to change the dog
...80 series washer fills but does not wash/agitate. will spin and drain when manually turning dial to spin The agitator dogs may be broken or the transmission could be bad. Try checking the agitator ...
...80 Super Capacity Plus Quiet Pak Model 100.26842692 If the bottom agitates and not the top, the problem is likely the 4 "agitator dogs" designed to allow the top agitator to turn only one way. I ...
Question about Kenmore Washing Machines
...series 80 washer: does not twist in the middle kenmore series 80 washer: the middle that turns has 2 parts, lower and upper. The upper section does not twist at all but the bottom section twists like ...
Series 80 washer (Model 110. 92480200)--does an extremely weak/intermittent agitation cycle. That's what I need, right? Hi, The parts number you seek is 80040 they should run about 5 bucks or so. Good
80-series w/ broken top agitator I have a Kenmore 80-series washer (10-15 years old) with what appears to be a broken agitator. The top portion of the agitator now spins freely (after weeks of a ...
Question about Washing Machines
...80 series Type 111 Model 24872300 Filled with water but will not agitate, spin or drain. There is no noise coming from the motor while trying various stages of the cycle. Could be complete motor ...
...80 series washer. It is presently full of water and obviously wet clothes. At some point the agitator stopped spinning and just does a clicking sound. agitartor stripped you can order the dogs at ...
Question about Kenmore Washing Machines
...80 model 1102983120 older top agitator gone I need the exact part to replace this is a DIY and cannot find matching part to my agitator dog coupling. Any help would be appreciated. Thanks in advance ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions
