Kenmore 22942 Top Load Washer "replaced capacitor burned" Questions

Capacitor burn out on Kenmore washing machine. Had a washing machine motor that was not getting up to speed and changed the capacitor. It is over 10 years old so that made sense to me. It ran good for

...replaced motor now it will not start. could it be the capacitor? I just had an issue where I thought the motor burned up. It turned out that the red wire from the motor start capacitor to the Motor ...

...water is filling into washer. We have replaced motor. motor only hums Sound like something else isn't turning because it's jammed the the motor is trying to turn. May also be the starting

...replaced the tensioner and motor but the drum just won't turn? I've tried to turn the drum to see if it's the capacitor but no joy. When I press the power button it makes a strange noise. the run ...

my wash motor was heating after i put a 16 uf capacitor that motor i put a 10 uf capacitor but it cant start the motor unless i turn it around and when i already put the garments inside the machine it

...replaced the capacitor and it seemed to fix the problem late summer last year. However this problem has started again. The belt is ok. Could it be the other capacitor that needs to be replaced? Any ...

My wife put a load in last night and a couple of hours later the laundry room smelled like something was hot and the washer had stopped on the spin cylce. The control panel didn't feel hot but I ...

...replaced the motor coupling, it was broke. Now it seems its frozen. Motor humming. Won't agitate or spin, fills up fine = wont drain. Timer is clicking and there is power drain, dimming the lights in ...

...replaced the motor and coupler. The washer works well and spins well but I've noticed as the cycle advances towards spin that there is a burn odor emanating from the machine. I can't seem to localize ...

...capacitor may not good enough to "kick start" the motor. You may also put some grease on shaft slinger/bearing. Also the belting may loose or simply the motor's winding is burned and need to be ...