Kenmore 22942 Top Load Washer "agitator working whirlpool 10" Questions

...AGITATOR WORKING ALL THE TIME. UPPER AGITATOR CAM BAD? HOW HARD TO REPLACE? You need to replace the agitator dogs. Yes...there is such a thing. These are four small plastic pieces under the agitator ...

Agitator not working My whirlpool agitator does not work at all, I just hear the motor humming. What do you think is the problem. Thank You advance timer to spin cylcle if it doesn't spin you have a ...

agitate my machine, 5 years old, won't agitate. I washed clothes earlier and it worked find, now, 2nd load it won't work. I got it to drain on a different cycle, delicate area. If it matters, the ...

...Whirlpool) HE Top loading washer model 1102613412. It works okay but it clicks during agitation when it gets to the end of the "swish" range. On agitation the agitator goes forward full range - back ...

...agitator and shaft are OK, the problem may be in the transmission. See the above Whirlpool / Kenmore installation and service manual for top load, direct drive washers. I'd also look at the ...

...Whirlpool LBT6133AWO CC4104141 Everything works except the agitator post. THe agitator in the bottom of the tub works, but the agitator arm is so loose that it doesn't move and therefore the clothes ...

Agitator just stop working. Spin cycle will run. Rinse will drain the water, add new water, but the Agitator will not work. Do you have any ideas? Do you know how old the machine is? This assumes that

...agitator to working condition. If you require further assistance, please let me know. I hope this helps you. PS If you do not wish top purchase on line, use the part number provided on the sears ...

...working, agitator does not move Machine is not going into spin cycle, also the agitator is not moving, it only moves by hand. model no. is lxr9245eq1 If it there is no agitation or spin, check the ...

...agitator not spinning/working, unless the entire spindle isn't going back and forth. I ordered this kit from these good folk and it arrived in 3 days. All you need to replace these parts is a 7/16" ...