x y.y.y.y where x is your IP address you wish to have and y is the subnet mask example below: router#config t router(config)#int f0/0 router(config-if)ip address 10.0.0.1 255.255.255.0 hope this helps
config-if)#ip address 1.1.1.1 255.0.0.0 Router(config-if)# no shutdown2.Create a DHCP IP address pool for the IP addresses you want to use. Router(config)# ip dhcp pool mypool3.Specify the network and
...IP config/all in MS Dos window. then, note down the default gateways IP address. Then, open a browser and put the IP in the address bar. this will open ur Router's Config page. Go under security to ...
...IP config range is found in the router config web >> Lan section. Then I set my router config >> Routing >> DMZ IP Address setting to the xbox ip I just assigned to my xbox. Restart ...
config is as follows int fa0/0.200 encapsulation dot1q 200 ip address -------- on Gig Port Int gi0/0.200 encapsulation dot1q 200 ip address The encapsulation used should match the switch trunk.Default
Question about Dynex Computers & Internet
...port 3389 for remote desktop. Do I use the ip from ipconfig or the ip from whatismyip.com? Also, what is public & private port in dynex e401 config screen? You need to use the IP from
mask.255.255.255.0 tos.0 next-h op.195.69.188.92 AP_600_Bukhara> Hi hey you can try this command router(config)# ip route 192.168.9.0 255.255.255.0 195.69.188.92 Might it helps you Thanks Harmeet :
Question about D-Link Computers & Internet
...from the manual you got with the router failing having the book then a google serach will tip up the info you need did that already, using the ip given from running ip config. that is the
...config my DSL acount in " cisco 857 Router " ? with a dialer interface: interface Dialer0 description $FW_OUTSIDE$ ip unnumbered Ethernet0 ip access-group sdm_dialer0_in in no ip redirects no ip ...
7 questions posted
Usually answered in minutes!
1,082 Questions
984 Questions
709 Questions
641 Questions
532 Questions