Kenmore 24872 Top Load Washer "water fills" Questions

...water fills fine, no hot water. I verified that there is hot water coming from the wall. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on the valve need ...

my whirlpool front load washing machine accept hot water and no cold water entering on the machine. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on the ...

My kemore 80 series washer will not fill up It still rinses and spins.I have replaced the water inlet valve and the water level switch. It is still not filling up. What is next? Should i replacethe ...

...Bendix Washing Machine, Wash Rinse and Spin lights are on, but the drum wont spin or take in water. Door is catching as it is closed. Model AW 1001W Type P689664 PRN 914211108(01) its the ...

I have the washer on cold water, but it runs warm, stops, trickles, then comes out warm again, stops, trickles, then warm again ect.On the rinse cycle it will only trickle out. The water fill valve - ...

...water fills the outer tank air is pushed up the hose, depending on which setting you have made ( small- medium - large ) is takes a certain amount of this pressure to make the WLC cycle over and shut ...

...water fills the outer tank air is pushed up the hose,depending on which setting you have made ( small- medium - large ) is takes acertain amount of this pressure to make the WLC cycle over and shut ...

water does not stop filling with water The possibility is faulty water inlet valve.The valve lets the water to enter the machine.But if this valve is got weak/faulty then it will not stop the water ...

Washing maching not filling with water Machine will not fill with water, instead goes to agitate mode. Does not fill on rinse, but does spray water during spin. Machine is about 15 years old. Model is

...water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, ...