D-Link DIR-615 Wireless Router "39 led factory" Questions

...39; light has stopped blinking and the configuration page you are on has refreshed, the router has been reset. Feel free to get instant online Netgear router support at ...

...39;s power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the AP to reboot.Reset the factory defaults.Here is your user ...

...LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything. (Held for 20 sec, then released) Can't connect to the router site (192.168.0.1) The internet works ...

...39;t turns off the wireless signal. 2.4 GHz and 5 GHz LEDs remain lit. Most Netgear routers have a recessed button on the back or bottom panel, marked "Reset" or "Restore Factory Settings". Because ...

...LED flashes or blinks, on certain models the router would restart itself. When you're done, access the router with the default username and password as stated in your user ...

...39;Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't ...

...39;t connect to the router ! no function at all only the red power LED is on ! is there any way to flash the router again or is it broken ? tryed reset but woudn't work ! reset to factory ...

...the router's LED flashes or blinks, on certain models the router would restart itself. When you're done, access the router with the default username and password as stated in your user

...39;t hard reset. dont know the password I got a DIR-615 from a friend. Everything was configured but i wanted to check the maintenance page 192.168.0.1 but the router wont let me in. i dont even come ...

...#39;ll find a reset button at the back, using a paper clip or similar press it for more than 5 secs, release when the power led blinks. the router should get back to its factory defaultsgood ...