Question about Kenmore Washing Machines
...model # 11020072991, type 111 looking at the tech sheet for this, it appears to be a standard whirlpool top load but with electronic controls, correct? normalling with this type a lid switch is the ...
...whirlpool so the model would help.does it agitate when it fills or not?any error codes?if you want to fix it yourself the problem is the boards are expensive and it's hard to tell what board is bad ...
...model 110 20702 991 will run until the spin cycle and not spin you can open the lid and reset timer to spin cycle and it will begin to spin. relaced lid switch still does the exact same thing This ...
...model Whirlpool / Kenmore washers use a Lid Switch as a safety device. Unless the switch senses that the lid on the washer is closed, the washer will neither agitate nor spin. Older models only used ...
...whirlpool model link that is claimed to be your washer, what is the complete model number you are missing a few #s I think either 110 or 926 perhaps here are three panal part#s for your model linked ...
...Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. First, see the Sears parts site for your washer: ...
...whirlpool made products go to www.servicematters.com click technical reference, technical library, tech sheets/wiring diagrams enter model number (kenmore number after the "110.") hope this helps ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions
