...stop water flow. We turned hot water at the source, put machine into spin cycle, drained all water and opened door. Sounds like a bad shutoff solenoid. It operates the valve to let water in and then ...
water will not stop on cycle my washer just keeps filling up with water and will not stop unless the main water source is stopped If you turn the timer off and the water still runs you have a bad ...
...water to stop by turning the washer off? If the water continues to fill when the power is off, you eill need to checnge the inlet valve. If the water does stop filling when the power is off to the ...
...stop Water entering the Dispenser and will not stop - even with the unit shut off. Only way to stop the water flow is to shut off water lines. check the water in celanoid may not be closing if not ...
water won't stop running Cold water runs continuously through the wash cycle. Tried running several cycles and still continues to run. Seems like the switch to stop the cold water from running in is ...
...water will not stop filling ... it would literally run over. it will fill all the way up and never stop. i have to turn the knob to the rinse cycle or turn off to get to stop ... when i advance the ...
Question about GE Washing Machines
...water will not stop filling in tub what would cause this The water level switch shuts the water off when it gets to the desired amount. Also change the water level to low and see if it stops at ...
Question about Washing Machines
...THROUGH THE HOSE /FILLING THE MACHINE WITH DIRTY WATER THE DRAIN HOSE AT ONE POINT OF IT'S LENGTH SHOULD BE HIGHER THAN THE TOP OF THE WASHING TUB TO STOP WATER CHIFFONING BACK INTO MACHINE. GOOD ...
Question about Kenmore Washing Machines
water It will not stop overfilling. It will spin out and drain but will not stop filling up. Not afraid to fix myself. Recently replaced agitator dogs 6mths ago. try it just on cold water let run,turn
...stop filling water I own a Frigidaire washer model GLWS1349AS1. Lately the washer don't stop filling water to the point of overfilling and water spilling on the floor regardless of what load size we ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions