Question about Fisher and Paykel Washing Machines
...Washing Machine intermittent & slow water flow into bowl then machine times out or errors. Removed inlet flow restrictors, fan on pump turns freely? valves are wearing out and need to be replaced. ...
...Washing machine fault My samsung washing machine fills with water at the usual speed but after a short time error code 4E is displayed. I have replaced the pressure switch the fault is still there. ...
...washing machine has a level switch which activates when the water level creates a certain pressure in a tube leading to the switch. The machine should just sit there until it gets the water to work ...
overflowing soap dispenser have tried bleech and c l r, threw clean cycle. smaller loads. smaller amounts of soap (HE). still over flowing water at front of soap dispenser Slow down the inlet water ...
washing machine not filling Machine powers on, door locks but doesn't fill with water, (cold fill only machine.) The machine is not filling with water. Been through the troubleshooting ...
...machine but the water fills very slowly. We are not in town so do not have mains pressure. We live on a farm which tends to be low pressure. Do they have a flow restrictor fitted. If so how do you ...
...machine - but my washing still gets the white soap(?) streaks. I have tried rinsing them again, but it still stays. Very frustrating!! Hi here are a few things that can help. there is a restrictor in ...
machine often solves this problem! Water temp set to only 30Degrees C and water pressures known to be on the low side. Have checked filters and pipes from solenoids all OK and kink free. Have found an
...flow restrictor in it at the inlet valve. On my unit a piece of "stray" plastic was partially clogging the flow restrictor. I carefully drilled the valve out enough to remove the stray plastic. Now ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions