Question about Washing Machines
...started to smoke during spin cycle then a cracking noise began after that. When a got the cloths out of the washer they had a smoked smell. I got the washer on test mode "t14" to test the ...
Question about Kenmore Washing Machines
...noise in spin cycle and now it started smoking. Tub seems to spin more easy but i don't hear anything like a bearing. LG WM2688H Front Load Washer Smoking power ... - Fixya www.fixya.com > ... > LG > ...
...noise started again after water filled and wouldnt agitate..... what is the possible problem? and solution.... Most likely the transmission on the motor has seized and will need to be repaired. Look ...
...started to agitate then I noticed it stopped and it was smoking. It is only about 2.5 yrs. old. I emptied it and then put it in the spin cycle to see if it would. It did, but when I opened the lid it ...
noise and then the belt started smoking. i took off the front panel and turned the bottom pulley on the tranny and it would turn clockwise but it would not turn when i turned it on in any cycle, could
...noise but wont start or do anything. The barrel wont spin with my hand but im not sure if its supposed to. When i stopped it last night it was on the rinse spin cycle but im not sure at what point it ...
...started heard a squekiing noise and then when the rinse cycle began the washer begin to smoke and the basement of full of smoke with a bad burning smell as if it was on fire. Water was still in the ...
...noise then smoke started coming out of the washer. What do you the problem may be? You need to replace the belt needed to spin the drum. It sounds to me like you may have been overloading the drum, ...
...started to smell something, and all of a sudden a noise came from the washer and then smoke came from machine really bad, the noise sounded like air escaping Looks like something is short circuited ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions