Kenmore 24032\24036 Top Load Washer "new pump installed working 70" Questions

...new pump and motor combo. It costs about $70 on e-bay (new). It is fairly easy to install (30 min). The good thing about the new pump is that you can take the cover of the pump off without taking the ...

...new one or repair? Assuming that this is a basic Kenmore / Whirlpool direct drive, top load, neutral drain washer. If the machine fills with water and goes through its' agitate cycle, the motor is ...

...new pump and motor combo. It costs about $70 on e-bay (new). It is fairly easy to install (30 min). The good thing about the new pump is that you can take the cover of the pump off without taking the ...

pump (two clips), the motor (two screws hold two clips on the motor), lift and set the motor aside, remove two 1/2 inch bolts for the motor mounting plate and three 1/2 inch bolts for the transmission

...new drain pump and motor combo that I replaced on the machinge approx 5 months ago. The original pump is solid and you can't take it apart to clean it. If there is a piece of clothing in it, you can ...

...pump from the washer and try to rotate the pulley manually. If it doesn't turn freely, it's frozen, replace it. If the water that pumps out of the machine goes back after the spin cycle, your washer ...

new gearcase runs about $163 at searspartsdirect.com. Just type in your complete model number and locate item number 9 under the "Brake/Clutch/Gearcase/Motor/Pump" heading. The part number is 3360629.

...new part with the metal sleeve in the center hole fits snugly and needs a few taps with a small hammer to be fully seated on the shaft. Approximately 1/4? of movement is needed for the coupler to be ...

...new motor...If he was wrong about the Speed Controller, I don't want to spend the $$$ on a motor. Our kenmmore front loader is having a problem with the pump. When it empties there is dirt with the ...

...pump out) except that it won't spin out the clothes. I have verified that the switch on the door is OK and the motor is running. If I give it a little help by hand the drum will spin on it's own but ...