Kenmore 24032\24036 Top Load Washer "getting wax cloth" Questions

...wax motor, but am not sure if that will solve this problem. Should I replace other parts as well? Have you cleaned the large drive belt, if it slips it could cause this sort of fault. Motor will stop ...

My Maytag Neptune washer never get in the full spin cycle. Clothes are wet when load is finished. Washer tub just goes back and forth. This usually is the sign of a burnt control board caused by a bad

wax pushes out a plunger which engages the door lock mechanism & pushes together the previously mentioned switch contacts that signals the washer controller that it is safe to spin the washer drum

Can I eliminate or at least shorten the delay on the door lock feature? Adding in the extra handful of clothes after I've already started my Neptune is frustrating due to the fact that it locks so ...

A burning smell while Maytag neptune was washing. My wife thinks it could be a belt. I think it smelled of buring plastic and seemed to be coming from the control unit. Shut down and unplug machine ...

Washer not draining, mold smell. Our Maytag front loading washer has been a constant source aggravation for us due to the exact same problems you describe. If your is under warranty or extended ...

Maytag Neptune Washer Problem I am renting a house with a Maytag Neptune - it has no manual. It keeps stopping and the panel reads "nF". What does this mean? It is also not draining/spinning well - I ...

...getting added and it never goes into the spin. I have tried putting it through the rinse cycle to get it to spin but no matter what I try it will not just spin, very frustrating! If you have any ...

neptune front load will not spin excess water - clothes saturated, will not go to the fast spin that gets majority of water out, if i spin it with my hand manually i can hear what sounds like a ...