Kenmore 24032\24036 Top Load Washer "80 series changing 3" Questions

80), so hopefully these helpful steps will eliminate the need to call a repair service and pay the additional labor charges. This is a repair of MODERATE difficulty. Just follow these steps: 1. Unplug

80), so hopefully these helpful steps will eliminate the need to call a repair service and pay the additional labor charges. This is a repair of MODERATE difficulty. Just follow these steps: 1. Unplug

...80 series Washer filled started then stopped. Won't move in any cycle. Sounds like the timer....is it hard to change out, could I possibly do it myself? If so, is there a site to coach me thru it. As ...

80 Series washer I need to change the top switch (that lets the spin cycle work), but how do I get the case off. If you're talking about the lid switch, here's the instructions you need: First of all,

...80 Series Model #110.28882790. It has 5 water level settings and it will only fill to the lowest level no matter what level it is set on. What is wrong & how can I fix it? The problem is commonly ...

...80 Washing machine. Can only read 3 beginning numbers of model series they are: 298 I was told to change the belt which is located behind the transmission would be a very big job and to buy a new ...

80-series super capacity model 110.29852991. The unit will fill up, pump out, won't spin & makes the grinding noise. Is this hard to replace? How do I get the back off of the washer? This is something

...Series 80 Washing machine that takes about 3 hours to fill up with water. The water just trickles in. Have checked to make sure the hose isn't stopped up. ANything else I can do? probably have junk ...

Started drying load, dryer shut off. won't turn on. checked door, changed thermal fuse, checked breaker. still doesn't work. light also not on. If this is an electric dryer, you may have lost half of ...

...Series 80 washer doesn't always spin, only 1/3 of time. I've already had the switch replaced and it didn't fix it. First of all check to see if the motor is running, then proceed as follows: If the ...