Kenmore 44832 Front Load Washer "door reversal elite he3" Questions

...Elite HE3 44832 is there anyway to reverse the door on this machine? it open towards the left and is very inconvenient for us becasue our dryer has to be on the left. so we pick clothes up over the ...

...HE3 lock latch stuck with door open HI!! I have a Kenmore HE3 that needs the CCU board replaced. In the mean time, while tinkering with it, I caused the seemingly spring loaded white plastic lock ...

Elite HE3 front load washer door locking mechanism issue My problem is that I can not get the locking mechanism to unlock to close the door. How do I reset the system to get the door closed? it reads

...elite HE3, Quiet pac,Washer wont start. Error reads Fdl, Washer wont start, error reads Fdl and the machine clicks.  1. Unplug washer. 2. Remove the outer portion of the door bellow. This is the ...

...elite HE3 washing machine fills with water while the door is open (or closed) and the machine is not on. There are no error codes visible. Lights are all off. This is an intermittent problem, about 5 ...

...Elite HE3 model no. 45862004. It is about 31/2 yrs old I' ve notice that water slowing builds up inside the drum over several days when not in use. I tend to throw in a few dirty clothes or thowels ...

Door lock failure on Kenmore Elite He3 The washer would not start because it said DLF. We figured out it was the door lock failure. My husband played with the door and all of a sudden the door is lock

...elite washer leaking during the cycle. I checked around and found the rubber seal between the front door and machine shredded. Seemed like that was the source of problem. Ordered new seal and clamp ...

...Elite Quiet Pak2 he3 wont read the door being closed what could be a fix to this? The door latch sensor is likely broken. 1. Unplug washer. 2. Remove the outer portion of the door bellow. This is the ...

...Elite HE3 Model 42822 has a leak at the rubber bellow. Do I have to remove the front panel to replace the bellow or just the bottom panel and the spring outside the bellow. Thanks for your helps.. A ...