Kenmore 44072 Front Load Washer "stuck shock absorber" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...shock absorber back together but now when it spins the tub is out of back could something be bent now and what could it be??? It is so expensive to get someone out here.anyone have an answer It ...

Ad

Question about LG Washing Machines

1 Answer

stuck when it gets to 11minutes left. The machine started out with 2 Q size sheets 2 pillow slips and 2 thinly padded pillow protectors. I would imagine that this is not a huge load for a 7 kg machine

Ad

Question about Kenmore Washing Machines

1 Answer

...stuck, and desperately need help. The washer completes wash cycles, but never spins. After performing the diagnostic test from the washer tech data sheet, I get error code E43 (Control Board problem) ...

...stuck It is so common that the washing machine can make terrible noise in many ways and is a common fault. In all occasions it is important that your observation is most important and so is vital to ...

...shock absorbers,maybe one is broken or the weight attached to the drum, is it secure and properly located? Check for play in the drum bearing by moving the inner drum side to side against the outer ...

...peg by pulling it with pliers.Re position the stuck piston by pressing it back & forth. It is a simple, looking like, bike shock absorber without springs. Mostly this will solve the

Question about Kenmore Washing Machines

3 Answers

...stuck in pump.2. Did a continuity test on the 3 sensors. All 3 switches working okay. Tried to short 3 sensors as well to take them out of the loop.3. Motor does work and will go up in spin speed at ...

Question about Kenmore Washing Machines

3 Answers

...stuck under the tumbler and it is LOUD when it spins. I have taken the top and back off and was going to separate the plastic housing on the tumbler and pull it out but cant seem to get the shock ...

Question about Malber Washing Machines

1 Answer

...stuck on the side (inside of course) of the drum, causing it to shake when spinning? If not, a spring or shock absorber (connecting drum to sides, bottom or top of machine) has broken or come

...stuck /rattling in washing machine plastic divider Inside drum Wd80130f It is so common that the washing machine can make terrible noise in many ways and is a common fault. In all occasions it ...

Not finding what you are looking for?
Kenmore 44072 Front Load Washer Logo

129 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Jim Chinnery
Jim Chinnery

Level 1 Expert

10 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...