...power light is not. help me please, hud Disconnect all speaker wires and signal cables from the amp. If it powers up normally (no protect light), the wiring needs to be checked. If it still goes into ...
protection light came on what cut off Amp in Protection - Troubleshooting - Basic Car Audio ... www.bcae1.com/.../troubleshootingbasicsampinprotect.htm Some simply shut down and the power light will ...
...protection light illuminates Hi the protection light comes on when there is a problem within the amps. circuitry. Generally speaking the protection light normally comes on when powered up while the ...
protection light on i have a ts 1440 power acoustik amp and the protection light is on. and i already have an amp in my car and i used the power and ground from that. and the amp that im trying to ...
protection light isnt why? and Normal? thanks If it begins to smoke with only the B+, ground and remote connected, the power supply transistors have likely failed. The protection light generally won't
...light amp is bad and if you have no protect light continue to hook up each speaker one by one while amp is on till you get a protection light and that speaker would be the source of your ...
Question about US Acoustics Car Audio & Video
Protection light flashes on and i get nothing when i turn on the ignition the amp will either blow the fuse or the protection light will flash then turn off and the amp will not power on. what does ...
Question about Jensen Car Audio & Video
...when i give the amp power the protect light comes straight on what is the problem:the protect light comes on Eith some wires touched, you dont have big enough fues or you have somehting hooked up ...
protection light coming on and amp cutting off my amp works fine until i turn up the volume then it cuts off and the protection circuit light comes on. i have double checked and everything is hooked ...
Question about AudioBahn Car Audio & Video
...protection light stay's on!! well the amp turn's on with da protection light staying on! Disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. ...
25 questions posted
Usually answered in minutes!
51 Questions
26 Questions
21 Questions
17 Questions
12 Questions