Gateway LX6810-01 PC Desktop "plastic memory" Questions

...plastic cover off to put in the memory be careful not to break the plastic lugs along the sides of the cover. As far as I can recall there are two lugs at the end of the cover and two on each side. ...

...DDR400 PC3200, 184p DIMM) 1 gb memory sticks. If the RAM type is correct check that it is properly installed. Firmly press the sticks into the slot until the plastic clips on the side snap into

...plastic top to slide off. Direction? Memory fading. Can't remember if you slide to the Front, or Rear. Looking at those plastic tabs should reveal this. Also cannot remember if the plastic Top needs ...

...plastic clips lock into memory stick.once done while power lead is removed turn on at tower.this will clear memory.plug back in and give it a try,if ok add another stick of memory although you said ...

...plastic tabs that you gently pull out and the drive is free. Unplug the two cables on the drive. *Memory: there are two small thumb snaps on each end of the memory stick that you push down and the ...

...the optical drive to get at the memory modules, how do I remove the optical drive? They are usually in a plastic caady which has a latch on it find the latch and release the caddy hope this ...

plastic panel. before closing the case, reconnect all the rear cables and test that the pc starts properly and if the new memory you just installed shows up in Windows Vista Home Premium which is what

...computer dected card reader as apen drive. are you not saying about ram ? it is also called memory. it is use in mother bord slot. they are white and plastic. you have to buy the usb memory card ...

...the top edge and the plastic tabs should snap back into place. Hope this helps! Open the keyboard side there you can get the memory bank then you can upgrade the Ram. im lookin for packard bell ...

...memory stick, you will see a bit of plastic on each side that holds the stick in place, just look for the other bits. You may need to take the current stick out to see properly. Hope that helps. ...