Question about Gateway Computers & Internet
...fan run extrememly high rpm on power up and will not return back to normal rpm, which results in bios not booting. please help if possible. mostly all fans are 12V DC try connecting all the fans ...
i just installed a fan for my aspire x3200 and not it won't boot up. i found my Acer Recovery Disk but it's 1 of 2 . where can i go to download the boot up disk Pfft. Before breaking things down to ...
...booting then the Processor fan is most likely to be the culprit. What could be happening is that the Processor fan is no longer turning fast enough to cool the processor, so normal the processor when ...
Computer won't boot My computer shut down suddenly yesterday and wouldn't reboot. The monitor splash screen came on, then POST, then nothing. I went into bios and reset to default, after ...
...load screen before the monitor messed up and it was just the fan working again. So whats the problem? booting files corrupted try to boot by inserting windows 98 bootable cd or windows xp bootable ...
Question about Gateway Computers & Internet
hp touchsmart 610 fan speeds up right after boot up and then the computer immediately turns off The main fan wore out so I got a replacement and put it in. Now, right after boot up the new fan speeds ...
Question about Computers & Internet
My topshiba equiumD200-139, Does not boot up fan goes very slow,any advice. Laptop does not boot up tries to,fan goes very slow is this the problem Do I need a new fan. The fan may just need cleaning.
Question about Computers & Internet
Ijust replaced the cpu fan and now the computer won't boot - it just flashes the gateway logo Ijust replaced the cpu fan - now my gateway computer just flashes the gateway logo and won't boot up. make
My hp media center m7160n computer powers up, has a definite fan sign, normally the fan sound diminishes and the computer boots up. For the last several months, the high speed fan sound would not ...
...fan and heat sink is clogged with dust the remove the dust and make sure the vents are clear and dust free. Use a small brush and can of compressed air to do this. I have a HP 6200 pro microtower. I ...
67 questions posted
Usually answered in minutes!
697 Questions
487 Questions
417 Questions
330 Questions
336 Questions