Kenmore 94802 Front Load Stacked Washer / Dryer "replace dryer belt loader" Questions

REPLACE BELT Frigidaire stacked front loader washer dryer. Mfr. Model 3GLEH1642FS Washer belt has slipped off, how do I put it back on? look to see if you have the little access panel on the back,you ...

loader hums instead of starting Try to get ahold of a qualified service technician that specializes in washing machines and dryers. My guess is it could either be if its belt driven the belt has broke

...dryer. thanks for reply Jane probably needs a belt.   pull the washer from the wall and tilt it back against the wall, make sure it is stable. then look under and find the belt and replaced from ...

dryer but louder) as it goes around. I took the door and back cover off but can't find anything wrong. The belt on the back of the drum is in tact. Is there anything else I can check. Do you think

...dryer and turning it scraps the side or squeeks on the dry cycle help Most likely a wheel bearing on the tub of a front loading washer, or the belt tensioner pulley on a top load washer.  Either ...

...then will rub metal to metal.when ordering parts replace belt too if damaged.if worn wont get a good spin and then dryer has to work over time.[power bill up.up,up.thanks for using fixya.God ...

belt to burn a little during the spin cycle. What can I do to fix this? We had very cold weather last week when this first happened, but the temps have been back in the 40's and 50's, so I don't think

...belt on my Kemore 94802 Front Loader started smoking bad. I opened it up and found that the belt had not moved and sat there on the motor pulley and melted down. I replaced the belt thinking it was ...

...replace the machine? Something seized up. Probably fixable. If under warranty call them up. If not under warranty, take it apart yourself! If these are like dryers, you may have just lost a plastic ...

...replace Our 10 year old front loader has started to make a roller whine" during spin cycles. So, I wanted to ask what a good assortment of replacement parts would be to purchase. Kind of a tune-up. ...