Kenmore 3.8 cu. ft. HE3t Front Load Washer "clean pump elite he3" Questions

...clean the drain pump: http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front If you are experiencing drainage issues and cleaning the pump does not work, you may have to replace ...

...pump clean-out.(Large,white screw cap) BE READY TO CATCH LOTS OF WATER. CAREFULLY AND S_L_O_W_L_Y unscrew the pump clean-out, catching and discarding the water. When the water flow finally stops, ...

pump I have a kenmore elite HE3 washer. I was getting the sud error and then eventually F02. I cleaned out all the drain lines and pump filter trap and this did not help. I've now replaced the

...pump and clean it: http://www.fixya.com/support/r615268-f02_error_code_whirlpool_duet_kenmore If the error code reappears after you clean out the drain pump, you may need to replace the pump. If the ...

...on my kenmore elite he3 front load washer - the washer will not open take kick panel off 3 torques screws t15 or 7 milli meter clean pump filter if this does not solve your problem replace your ...

pump clean-out and cleaned it. Stuck finger in pump impeller and it turned okay. Ran diagnostics and got same result: pump makes grinding noise. Do I need to remove pump and take it apart? Thanks. you

pump to clean. You may also have to remove the inlet hose that runs from the bottom of the wash tub to the inlet side of the drain pump. Debris can commonly clog in this area as well causing the drain

...Elite HE3 washer will not finish a cycle, flashing an error code of F02. Can you tell me what this is in reference to? "F02" is a Long Drain error code. The following link explains: ...

clean the drain hose and it worked fine. I travel, and I just got back tonight to a locked door that has apparently been that way all day... The error code F-02 on the Kenmore HE3 means that the drain

...Elite HE3 that is showing f21 problem. i have unplugged it, turned it back on about 3 times. They can not come to fix it for a week. Can u help? This usually indicates the drain pump filter needs to ...