Question about Washing Machines
...remove the soap dispenser tray on a top loading kenmore 90 series washer 110.28974890 The tray pops up easily on the soap dispenser side, but is somehow held in place on the softener side. I can't ...
...Remove the soap tray and clean the orifice. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question. Mine had the same problem. You need to remove the three screws ...
in FQ106D1 Main washsoap dispenser always has soap in it.checked water pressure and inlet pipes.almost feels like the soap is not being used. remove dispenser drawer and give it a good clean.adrian,,,
...remove the top cover you will see the soap dispenser unit on the left. It has a large rubber hose connecting it to the drum. If you remove two screws at the front you can free the dispenser for ...
...soap dispenser and the tub, remove the top of the machine, Normally 3 screws at the back lip of the machine. Now you have access to the soap dispenser. There is a pipe that runs from the dispenser to ...
...appreciated. Money is tight so trying to avoid having to call in a repair company. I know this is very simple but switch to powdered soap I'd water flow is good. Remember to remove liquid soap ...
...soap dispenser door. To remove top: Remove the bottom screw from the plastic clips on back of the washers top. next, stand in front of machine and, using the palms of your hands, sharply push the top ...
...remove the soap dispenser which in my case was getting very bunged up. I used soem fluid called swirl it (normally used for deposits in spa baths). Once clear the problem was resolved. the problem is ...
...soap dispenser when a hose gets blocked (usually with un dissolved soap powder) .Water flooding out of the front of a washing machine's soap dispenser can also be an indication of overfilling or a ...
628 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions