Kenmore 98702 Stacked Washer/Dryer "washing machine retain water drum" Questions

Ad

...drum, I heard water in the bottom. If you hear water swishing around when you turn the drum, but you don't see any at the bottom of the drum, that's normal and the way it's designed. Its most likely ...

Ad

Question about Zanussi Washing Machines

1 Answer

...washing has done with the fanal spin the machine does not go to door open and we cannot open the door hi the door lock will open providing the water is below a max level. Drum temp is lower than 40 ...

Ad

Question about Zanussi Washing Machines

1 Answer

...water The machine works ok but the clothes dont seem as dry as before after the final spin. The drum subsequently fills up with water. If I put the machine onto spin, water is pumped out but when I ...

water has come in or not. that will tell you. Also to check that it is just a physical problem and not a control board problem switch the machine off at the supply. If it still does it (from whichever

Question about Kenmore Washing Machines

1 Answer

...washing machine sat outside during a hard freeze (4 days without ever getting above 27). We had the water lines disconnected/dripping to avoid busted pipes, but we didn't realize there was a spot for ...

Question about Kenmore Washing Machines

1 Answer

...water in drum after cycle is complete( you can hear it when turning drum) and we were getting odor untill we cleaned drum with online instructions. Is the water normal or do we have a pump or check ...

I have a lg turbo drum, fuzzy logic 13,0kg. When i start the washing program, it s not retaining the water when its trying to fill it up presour switch?

Question about Bosch Washing Machines

1 Answer

machine, turn it to rinse and then turn it to spin to complete a washing cycle - Any ideas - thank you in advance for any possible solutions blocked check outlet pipe inside back top right hand corner

Question about Hotpoint Washing Machines

1 Answer

...drum by a large sprung retainer, remove this by levering it off with a screwdriver. put the new seal in and it's a case of putting the retainers back. the inside can be made easier with the ...

Question about Washing Machines

1 Answer

water retain in the drum & stops mid cycle Sounds like the "lid switch" will need to be replaced. What is the model number of your machine?

Not finding what you are looking for?
Kenmore 98702 Stacked Washer/Dryer Logo

1,103 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...