Kenmore 3.5 cu. ft. Front Load Electric Washer "1 compact" Questions

...1/3. E3 is water too high or too low, or hot water related not hot enough or vibration depending on maker. Error message E3 in integrated compact dishwasher indicates too much inlet water and/or a ...

...compact model, not full size. The model is LCE4332P01. The lid switch sounds and looks like it's working. I tried to look at the coupler, but I can't find a tutorial for my model. Any help is ...

...compact front-loader washing machine by Whirlpool. Tried everything - turned power off, ran a new cycle, unplugged, nothing will open the door. This worked for me. I turned off the washer and hit the ...

...compact whirlpool washer model LCR7244DQ2, SERIAL VLG4923565, TYPE 113-01, ASSEMBLED IN MEXICO, AGITATOR PART # 1154680 Retaing bolt on this model is not on top. uses a 1/4 inch hex head screw about ...

...compact front loading washing machine does not agitate or spin. When you put it on wash, it fills then a short time later drains and then shows the cycle complete but has not done anything and the ...

...1 about 10 years old or older The Black & Decker power tools are supported at http://servicenet.blackanddecker.com/Home . If you search for the PW1300, you'll see the oldest model (PW1300) listed ...

...you very slightly push the drum toward the rear of the machine (takes just one finger pressure and 1/6" movement) it contacts a metallic part - and if you then turn the drum it will make the ...

...compact size and the quick washing feature. I do not use the dryer feature and have installed a small Haier dryer above it for convenience. The error says I need to clean the pump but I do not know ...

...1)Compact, lightweight, tightly leaves a pleasing impression on you 2)Solid brass fittings ensure a longer and working life and no more worries about leaks. 3)Newst and improved aluminium clamp fixed ...

...Compact Washer. It has black flakey residue found on clothes after final rinse? Question edited for clarity and add Maker. Question moved to maker category. It appears to be a known issue with these. ...