Kenmore Elite 45986 Front Load Washer "washing machine stuck last 3" Questions

Washing Machine smells mouldy as has mould I have had a Hotpoint Washing Machine for the last 3 years and have done most of my washing on cold cycles. I heard this week that this will cause a build up

...stuck in it. The washer is only three years old and I am ready to throw it off a bridge. My husband and I had this same problem, but after visiting this website and reading through some of th posted ...

last year and have misplaced my booklet. The clothes are being washed but the water will not drain or the washer will not spin. The display panel shows an F02 code and continues to beep. What can I do

...last 3 months. Any solutions would be GREATLY appreciated! Thanks. It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to PartSelect.com or ...

Washing Machine develops moldy smell After the machine is used it deveolps a moldy smell as if there was stagnant water sitting in it. We have tried leaving the door open and drying the drum, door and

...stuck in the pmp. it was run a couple of times and during the last run the three lts on the front started to flash and would not run. I removed several discs from the pump and it still has the far ...

washing machine. It is at our cottage and there in no heat on in this cottage for the winter. What do I need to do? To winterize, follow these steps: 1. Unplug the washer. 2. Turn off the water supply

Machine finishing the washing cycle and water sitting in the bottom. Just started another spin cycle and it was ok. Then today it was starting beeping and flash an F 02 on the LED read out. Found this

...last thing I did was run the "Manual Diagnostic Test" as described below The door locks then nothing every time I hit the button to move to the next step nothing happens, does this mean it is dieing ...