Kenmore Elite 45986 Front Load Washer "unclog screen" Questions

Flashing code My washer keeps giving a code F H in the middle of the cycle. The following link explains the "FH" error code: http://www.fixya.com/support/r615354-fh_error_code_whirlpool_duet_kenmore ...

...the washer or is there a way of unclogging it? no way to unclog other than removing sedimet from screen assy. internally nothing need to replace.inlet watervalve 1 piece for both hot and cold

...is water supply,usually clogged screens in the hose hookup part of the machine. Remove hoses and unclog and remove any debirs from the screens.You can use a toothpick or a small tooth brush.

...still soaking wet. What is wrong? Your pump filter screen is probably plugged up.... see link below for a description of how to unclog... ...

screen indicated LP. Would not agitate, just hummed. I am not familiar with any error code referencing "LP". Could you be seeing "LF"? Below are the error codes listed for your washer: "LF" (Long Fill

...screen. I try to pause/cancel to start it again. It will go through about twenty minutes of the cycle and the same thing happens. The E10 error indicates a long fill error meaning the machine thinks ...

Why did it quit working? Power is still going to the machine but it will not empty water, spin or anything. Front loader need to use he(High Efficiency) detergent or the washer SUDs up. The detergent ...

i unplugged lines, all on correctly, now floods out I had to open up machine to unclog both lines, jnow after checking TWICE, the stupid thing is flooding out the bottom! I cant figure out why or ...

My Hotpoint Aqualtis displayed the F05 message last night. I completely unclogged the pump by removing all hoses and cleaning. I checked water runs through pump fine before re-assembling and then ...

...slowing the water flow. You can hook the drain hose off, force water through it with a water hose, unclog the stinky mess and hook it back up again and work it.. that would do it... ...