Kenmore Elite 45986 Front Load Washer "spin unlevel" Questions

spin cycle, washer said that it is unlevel and stops, but I check and clothes are level If your tub is level, then check the feet of the machine. If they are not leve, you will get the same error. Use

...spin cycle it starts to tub starts to bang against side walls and shortly after error out, with an error on electronic display. Kenmore Elite Oasis either unit is unlevel or one of the tub supports ...

...all over when in spin cycle. how do i fix. sounds like your machine is unlevel have you taken a level to the machine and the floor and checked both , they should never walk unless they are ...

spin cycle does complete job of removing all water. realized machine was unlevel. leveled it, but did not fix problem. i'm sure it was unlevel for quite a few years. could it be the belt has stretched

spin dry completely Hi, my Whirlpool was off balance and became unlevel. I leveled it again (back legs popped back up). Since then, doesn't spin dry completely. I have to hand wring the clothes. Thank

...unlevel and now it doesnt work at all when i try to start it restart it skip a cycle nothing works it almost sounds like it is gonna start spinning and then it stops The 2nd and 4th and spin light ...

spin only, but it won't complete a whole wash cycle. It is most likely out of balance, could be for many reasons. 1 could be too many heavy items such as jeans, towels, etc in one load. 2 could be the

...spin unlevel Firstly check the type of floor under it. If it is a wooden floor there may be movement when the machine starts to spin. Otherwise make sure the machine is level using a spirit level ...

...load washer is in final spin it shakes and bangs really bad what can it be? alot of the time it because the washer to full or the washer might have gotten unlevel,check both and let me ...

a unbalanced tub & making a clicking noise , everytime it goes to spin cycle it is unbalanced & I have to readjust the clothes again & again. The tub is leaning to the right at the end ...