...spin mode is a lot loader than it used to be If it's not an out of balance problem (the tub), then there could be something wrong with the clutch or the transmission pulley. Make sure you don't ...
...spin cycle. When I removed the front kick plate to try and figure out where the noise is coming from, it looks like it is in the 'shocks' or whatever those things are called that balance the machine. ...
...balance/spin about the central axis. I would like to fix this before I have issues with any bearings like others have had. Any assistance would be greatly appreciated. Thanks, Josh Hello, The biggest ...
...spin cycles. It also makes a horrific noise that sounds like it is coming from the drum. could it just be out of balance? ************************************************************************ This ...
Question about Kenmore Elite Washing Machines
balance thing and stopping in spin cycle the the UL coming up. Its not that the clothes are unbalanced it just keeps happening no matter what. What is the solution to this problem? Try running with no
Question about Kenmore Elite Washing Machines
washer makes excessive noise during spin cycle.. machine is 16 months old and the problem has existed fro 1 wk. the machine appeares to be level. could be clutch,transmission,out of balance
balance If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these
Question about Kenmore Elite Washing Machines
The washer makes a harsh thumping when washing but spins with no problems Hi, This problem is usually caused by unbalanced loads or damaged balancing springs. This solution might help you ...
Question about Kenmore Elite Washing Machines
...spin cycle. I get an out of balance(OB) error code and have to lift the lid to restart. I attempted to diagnose the problem and removed the dome and outer wash plate(bolts were tight but plate had a ...
...balance since the only times that I have had the 'f code' issue was during the final rinse/spin cycle, but, since the door won't open, there is no way to know nor fix the problem. Who knows, but the ...
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions