Kenmore Elite 45986 Front Load Washer "power starts stop pressing" Questions

...starts on a cleaning cycle atrouble code of p5 comes up and the washer stops washing PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to ...

...stop 2 times like it says to, it stopped and door opened. but now, I can't do anything. the power button is still on but no other buttons work. try unplugging and re-plugging. or powering off, ...

...STOP or POWER button to exit diagnostic test mode. If no indicators light up or if no beeping sound is heard when a button is pressed or if some buttons do not light up indicators when pressed, check ...

...this: Press "Stop" two times. Push "Power." Select the button for the desired wash cycle. Press the appropriate "Modifiers" and "Options" buttons to adjust the settings. Push "Start." thanks to ...

Power, Stop, and Stop. Press and hold the button for 3 seconds-->Release the button for 3 seconds--> Press and hold the button for 3 seconds-->Release the button for 3 seconds--> Press and

the Stop or Power button to cancel/exit the test.Inform us about the result of the test for the repair guide if necessary. I ean the diagnostic on my Oasis Elite. It stopped at C6. What does that mean

Kenmore Elite Oasis - stopped mid-wash! Stopped working mid-wash. Won't drain. Power turns on but doesn't start. Do I have to clean out a "drain pump?" Where is that? How do I do that? Is it not a ...

...power source by turning the breaker back on or plugging the unit back into the wall outlet. * Press the Pause/Cancel/Stop button twice to clear the "PF" in the display. * Start a short cycle to check ...

...power source by turning the breaker back on or plugging the unit back into the wall outlet. * Press the Pause/Cancel/Stop button twice to clear the "PF" in the display. * Start a short cycle to check ...

Stop, and Power. Press and hold the chosen button for 3 seconds and release it for 3 seconds; press it again for another 3 seconds and release it for another 3 seconds; press the same button again for