Kenmore Elite 45986 Front Load Washer "lid lock questions" Questions

lid lock won't release ? have tried unplugging to reset ~ but goes back in mode of beeping and a du (?) smybol in display On this washer, the dl code indicates a failed lid lock mechanism. Pressing ...

...lid switch then also what would i do to fix that.. ??? SL = Suds Lock SL is a suds lock code it can be caused by the drain pump not draining the water, too much detergent, non HE detergent, or extra ...

lock like it does when the lid is locked. I am not sure if that needs to be rest and the lid is just not locking and if there is a way to reset that function. Everything was working fine up until that

...lid lock mechanism. Pressing pause/cancel should reset the controls. You may have to unplug the unit for 20-30 minutes, then restore the power. If that doesn't work, the only other solution would be ...

lid lock mechanism is secured to the bottom of the washer top with two screws. Remove those screws and the wiring will be exposed. Unplug the harness from the old mechanism and connect to the new one.

...lid lock mechanism. Pressing pause/cancel should reset the controls. You may have to unplug the unit for 20-30 minutes, then restore the power. If that doesn't work, the only other solution would be ...

...and right door locks here. To access and see if the magnet is in place, remove the dispenser from lid. Gently pry the bottom of the plastic inner lid toward you then down. This will let you see if ...

...lid lock mechanism. Pressing pause/cancel should reset the controls. You may have to unplug the unit for 20-30 minutes, then restore the power. If that doesn't work, the only other solution would be ...

...lid lock mechanism. Pressing pause/cancel should reset the controls. You may have to unplug the unit for 20-30 minutes, then restore the power. If that doesn't work, the only other solution would be ...

...lid lock mechanism. Pressing pause/cancel should reset the controls. You may have to unplug the unit for 20-30 minutes, then restore the power. If that doesn't work, the only other solution would be ...