Kenmore Elite 45986 Front Load Washer "hotpoint stopped spinning loose" Questions

Ad

Question about Kenmore Elite Washing Machines

1 Answer

stopped with clothes and soapy water inside. Cannot empty water, complete cycle or even cancel or open door. What can we do? There is a water pump in the machine which pumps the water out of the outer

Ad

Question about Kenmore Elite Washing Machines

1 Answer

...spinning--and your machine was produced by Whirlpool®--you may have a broken coupler. Many Whirlpool-made washers use a small, relatively inexpensive device called a motor coupling. This ...

Ad

Question about Kenmore Elite Washing Machines

1 Answer

stopped with the control locked light on. Tried to unplug to reset, it didn't work. There is still a puddle of water in the basin. There is a water pump in the machine which pumps the water out of the

Question about Hotpoint Washing Machines

1 Answer

Hotpoint WML540 stops mid cycle, end of rinse going onto spin. Key lock light flashes, it also makes a banging sound as though washing trainers and then there are some clicking sounds before it stops.

Question about Hotpoint Washing Machines

1 Answer

...Hotpoint WDF740 washer/dryer which has stopped working. The drum doesnt spin but I can still move it freely with my hand. I think I saw an error F-02 the last time I used it a few days ago, but I ...

I have a hotpoint Aquarius wdl540 but it has stopped spinning. I have cleaned out filter and washed out the waste pipe. What else can it b x Any loose connections in your door lock?

Question about Hotpoint Washing Machines

1 Answer

...hotpoint WMA31 washing machine. It has developed a fault. It stopped halfway through a wash cycle. I turned it off, drained it by switching to a short spin so the pump is working just fine. It tried ...

Question about Hotpoint Washing Machines

1 Answer

...loose or damaged this would stop the machine from spinning.. Always remember to disconnect the power before opening any apliance & a qualified enginer should be considered however this simple ...

Hotpoint VBXR1070W0WW stopped spinning. When I opened it the belt was very loose but it does not look worn at all. Is it the belt or probably something else? Either the belt has stretched or the motor

Question about Hotpoint Washing Machines

1 Answer

...spinning? it has the carbon type brushes fitted I would not expect the brushes to be the cause of the problem in your case. More likely to be a control board problem, or possibly the motor itself. ...

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

4,939 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...