Question about Kenmore Elite Washing Machines
...HE3 Model prefix is 110 stops during the rince and spin cycle,beeps, and desplays F dL or F 11. The door light is not on, but the door is locked. We were able to start and complete the cycle by ...
Question about Kenmore Elite Washing Machines
...HE3 washer will not start. When the start button is pushed it should begin the cycle. However, it only makes a clicking noise and then flashes the code DL and F. The door lock is not telling the ...
...DL F code, but reading others comments I took off the top of the lid and traced the DL3 connector and unplunged it several times and my machine works fine... again I believe it's just a connector ...
...He3 The washer would not start because it said DLF. We figured out it was the door lock failure. My husband played with the door and all of a sudden the door is lock and the door is open and the ...
HE3 front load washer. I got a F then dL on the front display. I replaced the door lock assy. & the washer ran 1 time. Now I hear a several slow clicks, like a relay click, then get the F & dL
Question about Washing Machines
...dl" light come on - Kenmore Elite HE3 Washing Machinehttps://www.ifixit.com/.../Why+is+the+%22F+dl%22+light+come+o...iFixitThese are the errors for error code F/dL Door Lock Error Condition A Door ...
...dl or dh. Clothes are stuck inside. This could be the MCU which on an HE3 2009 3.8 cu ft washer front load appears to be the most common problem. This leads to the F71 because the MCU and the CCU are ...
...HE3 (not HE3t) F11/dL error code I have a Kenmore Elite HE3 (model number 110.45872400). This is not an HE3t that I see so many posts about. I'm getting the F11/dL error codes and would like to ...
...HE3? I have 2 codes popping up, DL & F. What should I do? Hello and welcome to FixYa DL f is a door lock error and is caused due to an issue with the door lock when it is unable to lock/unlock. ...
HE3 KENMORE ELITE. it gives a code F dl . Hello, W/D here. F dL is the code for a door lock failure. Visually inspect the lock for any damage. Usually the catch or strike is just loose, so tighten up ...
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions