...cold valve spot. It wont spin or do anything it just tries to fill then beeps. My wife overloaded which caused this to happen both times. She called a technician in last year when I was away because ...
...spot at what point it stops and waits. This will pinpoint what it's waiting for. If it's waiting to heat up - and the element has blown. it will be stone cold. This is a common fault. Let me know how ...
...cold solder joints) where the spade connectors and relays (5 of them) are supposed to be soldered firmly to the circuit board. The cure is to remove the circuit board and touch-up those solder points ...
...cold solder joints, at the points where the spade connectors and relays (5 of them) are supposed to be firmly soldered to the circuit board. With these bad solder joints it's hit-or-miss if the CCU ...
Question about Fisher and Paykel Washing Machines
cold to hot of the other valve. Without putting the machine together but making sure nothing is in the wrong spot, turn the machine on. If the same error occurs then it's not the valve (valves are
...cold water valve over the limits. E95 Communication error. EB1 Incoming power frequency out of limits. EB2 Incoming line voltage above 130 VAC. EB3 Incoming line voltage below 90 VAC. EF1 Clogged ...
...cold. Now the other valve seemed to not work. The problem was in the "Floodsafe" feature of the supply hose (shuts off if flow exceeds 2.5 gpm) Reset the hose and all is well. RE: kenmore he4t washer ...
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions